Command to setup the tunnel
ssh -N -p 11000 remoteuser@remotecomputer.net -L 5901/localhost/5900
To view from Local computer
vncviewer 127.0.0.1:1
So the first command sets up the tunnel from the local machine to the remote computer using port 11000. The 5901 port on the local machine is forwarded to the 5900 port on the remote machine. Now when you use your local machine to connect to port 5901 on the localhost this allows you to connect to the vnc server on the remote machine via the port 11000 tunnel.
Subscribe to:
Post Comments (Atom)
BT Infinity Finally!
I have finally received super-fast broadband and it was enabled on Wednesday morning around 10am. I never noticed till a day later when I lo...
-
The ABS warning light lit up continuously on my daughters Ford Fiesta Style 2005 plate. After a bit of Googling (other search en... -
I bricked my MR3220 router with an OpenWRT firmware upload. I did manage to get it back by soldering a 4 pin header on its pcb to allow conn... -
Server failure This server failed with the error "E171F PCIE Fatal Err B0 D3 F0" during power up. Upon inspection it was found th...
No comments:
Post a Comment