A place to where I can record my Technical stuff that should be accessible from anywhere. It is mainly technical stuff I find interesting and I suppose it can be looked on as a modern Lab-book.
Tuesday, 3 April 2012
OpenWRT and the TP Link WR841N
The WR841N has no USB port on the case but USB is available on the PCB if you can solder and don't mind a bit of work to get it going. I had a problem getting the USB connection I made to the WR841N PCB working. I tried various flavours of patched firmware with no success, however on the OpenWRT Forum someone mentioned just use the TP Link MR3420 firmware. This I did and it worked straight away, smiles all round.
I then got extroot to a 2GB memory stick working, this allowed me to add more packages. I added a USB hub to allow the connection of a USB webcam.
Subscribe to:
Posts (Atom)
BT Infinity Finally!
I have finally received super-fast broadband and it was enabled on Wednesday morning around 10am. I never noticed till a day later when I lo...


-
The ABS warning light lit up continuously on my daughters Ford Fiesta Style 2005 plate. After a bit of Googling (other search en...
-
I bricked my MR3220 router with an OpenWRT firmware upload. I did manage to get it back by soldering a 4 pin header on its pcb to allow conn...
-
Server failure This server failed with the error "E171F PCIE Fatal Err B0 D3 F0" during power up. Upon inspection it was found th...
